MOOMA flexible loading and unloading / transporting
Application field
Chip semiconductor(support for consumer-grade, industrial-grade, automotive-grade, military-grade, aerospace-grade chips)
3C electronics, electronic and electrical, Automotive Industry, machining, mechanical equipment, furniture and building materials, energy industry
Chemical industry, Experimental research and development, biopharmaceutical, medical equipment, food and beverage, cosmetics...
When the traditional mechanical arm load and unload the material, it needs to accurately place the work parts in the fixed position that is set in advance. But the mechanical arms can only swing from fixed point A to fixed point B according to the engineer’s presetting, and cannot flexibly run according to the changes in production environment. Therefore, in the actual production deployment, engineers need to spend a lot of time in considering the various possibilities that will occur, and plan the position and motion track one by one, so as to ensure the stable production.
Flexible loading and unloading solution, based on MOOMA core technology-robot intelligent training platform allows robot arm to independently plan robot arm motion with the production requirements and environmental changes. For different work parts and environments, it will operate with target, reduce the manual participation in the production process, reduce the cycle of the production deployment, reduce the labor cost and time cost. It not only meets the needs of various small-batch production to reduce cost and improve the efficiency, but also produces the single variety massively to improve the production efficiency and yield.
Comparison of loading and unloading plans
MOOMA flexible loading/unloading/handling
Deployment difficulty
Automatic matching deployment according to production requirements
Engineers need to learn programming systems and stability depends on personal experience
Manual training deployment is not difficult
No manual debugging, adaptive matching, high deployment efficiency
It needs engineers to revise and debug repeatedly for different products
No deployment required
Automatic production is not affected by fatigue
Manual work is inefficient due to fatigue
Subject to artificial fatigue, emotional and other factors
Automatically change line in a short time according to the production requirement
Engineers need to debug the rework repeatedly
There is no difficulty in manual work
Less or no labor is required
No need for manual debugging and deployment, the spread of the virus can be effectively avoided by remote control
It needs the engineer to debug and deploy, there is the certain risk of transmission
Person-intensive production, the risk of epidemic transmission is high
Engineers are required to debug the different products separately
Labor intensive
Rely on manual work
Fully follow the process requirements, and it can correct production errors independently according to the changes in production environment
Perform operations with high accuracy according to engineer’s preset
There is uncertainty due to human factors
7*24 hours operation
7*24 hours operation
Flexible automatic production not affected by fatigue
easy
short
low
low
uncontrollable
high
difficult
long
high
Instability
high
support
Adapt to multi-variety production
Fast change of the production line
Small and large batch production available
support
The robot arm has the advantages of high speed, high efficiency and high yield
safe
It can predict collision, avoid obstacles automatically and support for accident alarm automatically
support
Available to remote training and command issuing
Support the control in different places and foreign countries
Relatively safe
It needs experienced engineers to consider various safety hazards and avoid them one by one
support
The robot arm has the advantages of high speed, high efficiency and high yield
support
Available according to the production plan
high cost
For multiple varieties of small batch production, it takes a lot of time to debug and deploy in changing line. The labor cost and time cost are very high
high cost
The lower artificial production speed, lower efficiency, lower good product rate, high production cost
unsafe
There are some hidden safety hazards in manual work
not supported
Manual deployment and debugging required
not supported
Manual work only
24h
24h
high
high
high
short
high
high
high
low
low
limited
easy
Deployment efficiency
Production efficiency
Debugging cycle of changing line
Labor cost
Production yield
Operation time
Multi-variety small batch production
Single mass production
Production safety
Remote control
Risk of COVID-19 transmission
Loading and unloading/transporting of traditional mechanical arm
Manual loading and unloading
MOOMA core technology -- intelligent training platform of robotic arm
The upgrade of the material production
Strong technical support
When the traditional mechanical arms load and unload the material, with different shapes of different work pieces. The engineer needs to set the movement track and grasp logic of the arm for each different-shaped work piece separately. Besides, many uncertain factors shall be taken into account such as the possible collision under actual working conditions, and the possible angle deviation of the work piece in the production. For this, the debugging, testing and rework shall be carried out one by one. It takes a lot of time during this process, will bring about huge labor cost and time cost to the enterprise. While there are many varieties of products, the cost of debugging robot arms may be greater than that of manual production, which makes the use of the robot arm unworthy.
MOOM core technology-intelligent training platform of robotic arm. With the help of intelligent track planning and the real scene technology, the shape, feature, position and angle of work pieces can be determined in real-time. If the work piece changes, the arm can independently generate appropriate track according to the changes to ensure smooth production. It can help enterprises improve the utilization rate of the robot arm and production efficiency, saving huge labor costs and time costs.
According to the requirements of different products, we can independently plan the movement track of the arm, with no manual time-consuming, debugging and rework, the deployment of changing line can be completed in a short time.
Intelligent trajectory planning
Match realistic working conditions
Lower threshold for to robotic arm deployment
The high technical threshold of robotic arm deployment is an issue that is hard to be ignored within the trade. The track planning is the core of deployment, and also the most time-consuming. It’s necessary for the experienced engineers to conduct the repeated rework and debugging in each industrial robot brand’s virtual simulation software. If the actual working conditions are complex and the requirements for the track planning of the arm are very high, the time for production deployment will be more.
Clear function layout, the simple UI interface
Visual production deployment
MOOMA core technology-intelligent training platform of robotic arm not only can effectively train the arm’s responding ability, but also have many built-in technologies, which makes it the arm deployment easy, dramatically reducing the difficulty of the arm deployment and lowering the threshold.
·Available to use within 1-2 days
The function layout is clear, the UI interface is concise, no need to learn the complex code programming. Just according to the production requirement, it’s necessary to create the module, set up parameter configuration, you can conduct the production deployment.
·Match the real working condition scene
It’s necessary for engineers to spend time debugging in the actual production deployment. With the visual technology, it can accurately capture the deviation between the real and the virtual. Through intelligent trajectory planning, the mechanical arm independently makes a reasonable plan for track and operate accurately and efficiently.
·Visual production deployment
Present the motion of the robot arm in 3D dynamic way, so that the production deployment is more intuitive, simple to improve the efficiency of the deployment. Meanwhile, it makes easy to correct errors.
·Correction of the real-time dynamic tracks
It can grasp the dynamic changes in the production environment in real time. According to the deviation changes, it will independently correct the arm track, accurately and efficiently work to ensure smooth production.
·Intelligent track planning
After production is preset, the intelligent training platform can quickly and independently plan the most suitable motive path according to the production demand, without the engineer’s debugging step by step, and work efficiently.
·Unified deployment of multi-brand industrial robots
Users need not learn the deployment software for robotic arm with various brands. With the intelligent training platform, the multi-brand robot arm can be managed and deployed in the unified way.
Application
|
|
Application scenario
Shanghai
Floor 2, Building 27, Gem Garden, No. 1595, Gumei Road, Xuhui District, Shanghai
(+86) 021 5437 6715
info@moomatech.com
Compound robot, mechanical arm planting, mechanical arm picking, stacking robot, industrial robot stacking, stacking robot, stacking robot, sorting robot, handling mechanical arm, robot loading and unloading, industrial robot loading and unloading, flexible loading and unloading robot, flexible loading and unloading robot, flexible automation, laboratory robot
Ningbo
Building 1, No. 4, Xinhengba Road, Jiangbei District,Ningbo,Zhejiang Province
(+86) 0574 5620 2780
info@moomatech.com
Berlin
No.19 Heide Strasse Europe City,Berlin,Germany
(+49) 176 6102 5538
info@moomatech.com
MOOMA AI Technology(Shanghai) Co.,Ltd
